Zip-Front Work Vests from Bangladesh for USA Site and Warehouse Crews

Work Vests Made to Order in Bangladesh for Site, Warehouse and Service Crews

A work vest is the one garment a whole crew shares. Shirts change with the season and jackets come off indoors, but the vest stays on - over a tee in summer, over a fleece in winter - and it is the layer a customer reads the company name on. Our work vest is built for that job: a sleeveless zip-front vest in sturdy twill, sewn plain and strong, with the fit, the pockets and the back panel a crew uses every day. Our Dhaka factory has sewn workwear since 1987, and suppliers reorder this vest because the tenth order matches the first.

Every order is made to order: your colour, your size run, your back print, your label and your packing, cut and sewn as one controlled run in our own plant.

Cotton Twill and Drill Cloths Picked for Daily Wear and Hard Washing

The shell is a mid-heavy cotton twill or cotton rich drill with the diagonal weave open to the eye and a matte, dry hand - no shine, no slippery finish. It is cloth chosen for rubbing contact: tool belts at the waist, seat belts across the chest, carton edges and door frames, washed hard and issued again on Monday. Rolls are checked for shade, weight and hand before cutting, and the whole run is cut from cloth held to one standard.

Core colours are khaki, stone, olive, grey and burgundy, dyed to your standard and held across the run, so a top-up order matches the vests already on your crews. Your own colour runs to an approved swatch.

Full Zip Front, Bound Armholes and Side Tabs That Set the Fit

The front closes with a full length zip under a stand collar, so it goes on and off over layers without pulling over the head. Armholes are bound, never left raw, and the shoulder yoke is double layered where lifting straps and seat belts sit. Seams are felled or double stitched at the shoulders, armholes and pocket mouths, the points that take the strain when a wearer reaches and lifts.

Two chest pockets sit flat for a phone, a notebook and pens, and two lower patch pockets with flaps take gloves and small tools. Side tabs at the waist let each wearer set the vest close over a shirt or open over a fleece, and the hem is straight, finishing clear of a tool belt.

Room Through the Chest So the Zip Closes Over Winter Layers

A vest that only fits over a shirt fails its crew for half the year. Our block is cut as a layering garment: chest ease is graded into every size, the armholes are cut deep enough to reach and lift without binding, and the back is a touch longer than the front so it stays down when the wearer bends. The sample is checked zipped over a fleece, not over a tee.

Work Vest Sizes S to 4XL Graded for the Canadian Workwear Market

Sizes run S to 4XL on adult measurements, graded so proportions hold across the run - small sizes are not swamped and large sizes are not just widened. Canadian workwear buyers run this vest as a year-round crew layer, worn over insulated clothing for much of it; their block carries the extra chest ease and back length that work asks for, kept under the buyer's name for every reorder.

Send your own size chart and we produce to it. The chart is locked into the production file and checked at final audit, so size XL next season matches the XL your crews wear now.

Your Company Name Across the Back, Your Label at the Neck

The back panel is left plain and sized for one job: carrying your company name where it reads across a site. The name can be printed in one or two colours or embroidered for a heavier finish, and a chest mark can sit over the pocket. Your woven label is sewn at the neck, and size tabs, hang tags and barcode stickers follow your format.

We sew the sample with your actual artwork before bulk, so you approve the real print, the real stitching and the real cloth. Vests arrive folded, split by size and colour as your depots or crew shelves ask.

Approve One Vest Over Your Own Layers, Then We Sew the Run

Send your colour, size run and artwork and we return a costed quotation with cloth options. A pre-production sample follows in your main colour with your print and label fitted - zip it over the bulkiest layer your crews wear, load the pockets, work a shift in it. Only on your written approval do we cut bulk. Inspectors check measurements, zip action and pocket stitching in production, and finished vests pass a final audit before packing.

Minimum order is 3,000 pieces total per order, with 800 pieces per colour or style inside that total, so a two-colour, full-size crew program ships as one consignment. Your approved file stays under your name, so the next order is a reorder, not a fresh negotiation.

Markets We Ship Work Vests To

USA: Core Vest Lines for Workwear Suppliers and Uniform Houses

American workwear suppliers and uniform houses take this vest as a core crew line: one colour per crew, the company name across the back, run from S to 4XL and reordered season after season.

UK: Mail Order and Online Workwear Retailers

British mail order and online workwear retailers list the vest in khaki, stone and olive under their own label, restocked in full size runs through the year.

Germany: Crew Vests for Industrial Service Companies

German industrial service companies issue the vest to maintenance and installation crews, with the company mark on the back and chest, colours held steady across every site.

Canada: Layering Vests for Cold Season Outdoor Crews

Canadian buyers order the roomier block for crews who wear the vest over insulated layers through a long cold season, in grey and burgundy matched to their other crew garments.

France: Renovation and Fit-Out Contractor Crews

French renovation and fit-out contractors take a closer cut in stone and olive, with a printed company name across the back and name embroidery for site leads.

Australia: Lightweight Vests for Warm Season Site Work

Australian site programs run the vest in lighter colourways through long warm seasons, packed by crew and size for fast depot issue.

Questions USA Buyers Ask Before Ordering Work Vests

Will the vest close over a fleece or hoodie in the big sizes?

Yes. The block is graded as a layering garment, with chest ease and deep armholes at every size, and the sample is approved zipped over a fleece before bulk cutting.

Can our company name print across the back panel?

Yes. The back is one plain panel sized for a printed or embroidered name, and the sample carries your real artwork, so placement is approved on cloth before the run.

What is the minimum order for a work vest program?

3,000 pieces in total per order. Inside that total, each colour or style starts from 800 pieces, so two crew colours in a full size run ship together as one consignment.

Can two crew colours run inside one order?

Yes. Colours split from 800 pieces each inside the order total, and each colour is cut, printed and packed to the same file, so both crews get the same vest in their own colour.

Do you ship finished work vest orders to the USA?

Yes. The USA is a main market for this vest, and orders ship with full export documentation, through your nominated forwarder or freight arranged by us.

If this vest fits your next crew program, send us your colour, size run and artwork today. We will reply with a quotation, cloth options and a sample timeline.