Fleece-Backed Softshell Jackets from Bangladesh for USA Work Crews and Uniform Suppliers

Softshell Work Jackets Sewn to Order in Bangladesh for Daily Crew Wear

A work crew does not stand still for a photograph. The jacket that gets worn all day bends at the elbow, gives at the shoulder when a man reaches up to a rack, and still looks tidy in a customer's office. Our softshell work jacket is built for that middle ground - warmer than a fleece, lighter and quieter than a padded coat. Siatex Bangladesh has made garments in Dhaka since 1987, and buyers reorder this jacket because the fit, colour and finish come back the same, run after run.

Every order is made to order - your colours, crew mark, label and packing, produced as one controlled run in our own plant and held to the approved sample.

A Matte Woven Face Bonded to Fleece That Moves With the Body

The cloth is two layers made into one before a single panel is cut. The outer face is a fine woven cloth with a matte surface and the weave showing in it, so the jacket reads as fabric, not sheeting. Bonded behind it sits a brushed fleece, which holds still air against the body and takes the edge off a cold morning.

Because the layers are bonded, the jacket bends as one cloth: no lining to twist, no shell sliding over a fleece at the cuff. The woven face sheds light drizzle and blocks the wind that cuts through a plain fleece. The bonding weight is set at sampling - lighter for service work, heavier for yard and site crews - and bulk cloth from the same lot is available for buyers who run their own fabric tests. Core colours are grey, olive, burgundy, teal and stone, dyed lot by lot against your approved standard.

Zip Pockets, Storm Front and Cuffs Set for Working Hands

The front zip runs the full length under a fabric chin guard, so the slider parks against cloth at the throat. A zipped chest pocket keeps a phone flat against the body, and two zipped hand pockets take gloves, keys and small tools. Zip pulls are sized for a gloved hand.

Cuffs close with an adjustable tab, sealing over a glove or opening up when sleeves are pushed back. The back carries a plain yoke, so reaching and lifting do not drag the hem up, and a hem drawcord lets each wearer set his own fit. Seams that take strain - armholes, pocket mouths, the base of the front zip - are double stitched or bar tacked, and the build is checked on the body at sampling.

Sizes S to 4XL With Extra Body Length for German Crew Programs

A crew program covers every build on the team, so grading matters as much as the sample size. Our blocks are graded on adult men's measurements with the proportions held at each step: chest room, shoulder width and sleeve length grow together, so big sizes do not turn into tents and small sizes do not pinch at the shoulder. German buyers ask for more body length in the larger sizes, and that setting is built into the block for their programs and kept on file.

Send your own size chart and we produce to it instead. The approved chart is locked into the production file and finished jackets are measured against it at final audit, so size L next year is the size L your crew wears now.

Your Crew Embroidery, Woven Label and Depot Packing on Every Jacket

Bonded cloth shows up poor embroidery fast: threads wandering, the face puckering around the badge, a logo sitting off centre. Our embroidery is digitised for the bonded face, backed so the cloth stays flat around the stitch field, and placed to a template, so the last jacket carries its mark where the first one did. Chest, sleeve and back placements are all available.

We sew a sample with your actual artwork before bulk, so you approve the real stitching on the real cloth. Your woven label goes at the neck, tags follow your format, and jackets are packed by crew, size or depot as you ask - nothing on the garment or carton names us.

From Cloth Lot Approval to Crew-Ready Cartons - How a Softshell Order Runs

Send your colours, size spread and artwork and we return a quotation with the bonding weights and pocket options. A sample follows in your main colour with your embroidery applied - work the pockets with gloves on, wear it through a shift. Only on your written approval do we cut bulk. Inline checks cover measurements, bonding, zip work and embroidery placement, and finished jackets pass a final audit before cartons are sealed.

The minimum order is 3,000 pieces in total, colours and sizes combined; within it, each colour and style runs from 800 pieces, so a buyer can open with two colours and a full size run in one order. Your sample, chart and colour standards stay on file for reorders.

Markets We Ship Softshell Work Jackets To

USA: Layer Jackets for Contractor and Service Fleet Crews

American contractors and service fleets run this jacket as the standard crew layer, embroidered with the company mark and graded to 4XL so the whole team is kitted from one program.

UK: Uniform Softshells for Facilities and Site Teams

British facilities firms order the jacket as a tidy uniform layer over a polo or shirt: steady colour, steady fit, and packing split by size and site for top-up orders.

Canada: Cold-Season Crew Jackets for Northern Depots

Canadian buyers take the heavier bonding setting for the cold shoulders of the year, with room graded in for a fleece under it, packed by depot for one-drop delivery.

France: Own-Label Work Softshells for Uniform Houses

French uniform houses run the jacket under their own label, with their tags and retail packing, and chest embroidery set to their house placement.

Australia: Lightweight Work Jackets for Mild-Climate Crews

Australian programs order the lighter bonding setting for mild weather work, with the same pocket layout and crew embroidery, packed by crew for direct issue.

UAE: Tidy Team Jackets for Warehouse and Field Staff

Warehouse and service firms in the Emirates use the softshell as a smart team jacket for drivers and technicians - a clean front for customer-facing work, in a cloth that stands up to daily wear.

Questions USA Buyers Ask Before Ordering Softshell Work Jackets

Is the jacket sold with a waterproof rating?

No rating is printed on it, and we do not claim one. The woven face sheds light drizzle and blocks wind, which is what a working layer is asked to do. If your program tests cloth to its own standard, we supply bulk cloth from the production lot for your own checks.

Can our logo be embroidered on the bonded cloth?

Yes. Send your artwork and we digitise it for the bonded face, sample it on the real cloth for your approval, and embroider every jacket to a placement template.

Which fleece backing weights can we choose?

Two settings cover most programs: a lighter bonding for service work and a heavier one for yard and site crews. The choice is fixed at sampling and held for reorders.

Can the same order carry two colours and a full size run?

Yes. Colours and sizes combine inside the order total, each colour running from 800 pieces, and cartons can be split by colour, size or depot.

What is the minimum order quantity for softshell work jackets?

The minimum is 3,000 pieces per order across colours and sizes, with each colour and style running from 800 pieces within that total.

Do you deliver softshell work jacket orders to the USA?

Yes. The USA is the lead market for this jacket, and orders ship with full export documentation, through your nominated forwarder or freight arranged by us.

If this jacket fits your next crew program, send us your colours and artwork for a quotation.