Anti-Pill Fleece Pullovers from Bangladesh for USA Outdoor and Workwear Programs

Fleece Pullovers Made to Order in Bangladesh

A fleece pullover is judged by its face. The buyer rubs the pile between finger and thumb, holds it to the light to check for shine, pulls at a seam and looks at whether the cuff comes back. All of that is decided by the cloth and the cutting table, not at final inspection. Our factory in Dhaka has made garments since 1987, and outdoor and workwear buyers return to this style because bulk production holds the softness, the fit and the finish of the approved sample, order after order.

Every order is made to order: your specification or ours worked to your size chart, your colours and embroidery, your label, produced as one controlled run in our own plant.

Anti-Pill Microfleece and Polar Fleece from 180 to 340 GSM

The cloth decides what the pullover is for. Light microfleece at 180 to 220 gsm serves the layering styles that go under a shell or over a base layer, soft against the skin and quick to dry. Mid-weight fleece around 260 gsm carries the core of most workwear and outdoor ranges, and heavy polar fleece at 300 to 340 gsm serves cold-weather programs where the buyer wants real warmth without weight. Every cloth is anti-pill finished on both faces, brushed to an even pile with no shiny patches, and checked for shade and hand before cutting, with any off-shade roll set aside rather than sewn into a garment.

Quarter-Zip and Crew Necks, Bound Cuffs and a Hem That Sits Right

The make is set by your specification. The quarter-zip style carries a zip with a chin guard at the top so nothing rubs the neck, a stand collar that sits up or folds down, and a zip garage stitched flat. The crew style runs a ribbed collar band that holds its shape. Cuffs are elastic-bound or ribbed so they seal over a glove or a shirt cuff, hems run as a knit bottom band or with an adjustable drawcord and cord locks, and seams are sewn flat so the pullover layers without ridges under a jacket.

A Layering Fit That Works Over a Shirt and Under a Shell

Our pullover block is cut for layering: room through the body and sleeve to go over a shirt, a shoulder that follows the arm without pulling, and a length that covers the waistband of a trouser without bunching. Fleece panels are rested and checked against the pattern before sewing, because fleece can creep under the machine foot, and the finished garment is measured flat - chest, body length, sleeve length and hem - against the approved sample. The fit that is approved is the fit that ships, size for size.

Fleece Pullover Sizes S to 3XL Graded for the German Outdoor Market

The mens and ladies runs cover sizes S to 3XL, graded with the ease, body length and sleeve length held in proportion, so a 3XL keeps the same line as the medium instead of simply widening. German outdoor buyers ask for a slightly longer body on this style so the hem stays put under a pack belt, and their programs are graded with that length carried through the sizes as standard; any buyer's own size chart can be followed the same way. A full size set is measured before bulk sewing starts, and production does not begin until the set passes.

Chest and Sleeve Embroidery, Woven Neck Labels and Retail-Ready Packing

The pullover leaves our floor as your product. Your logo is embroidered at the chest or sleeve with thread matched to your artwork, your woven label sits at the back neck, and the size and care wording follows your format. Hang tags, price tickets and barcode stickers go on at packing, colours can be mixed inside one order, and nothing on the garment or in the carton names us.

From Fabric Booking to Packed Cartons - How a Fleece Pullover Order Runs

An order starts with your specification: cloth weight, style, colour, size chart, embroidery artwork, label and packing. We book the fleece in your colours, sew the sample in the actual cloth and send it for approval; comments come back, the sample is corrected, and only the approved sample releases bulk production. The run is sewn as one order on our floor, with checks at cutting, sewing and finishing, and a final inspection against the approved sample before cartons are sealed. Programs start from 3,000 pieces per order, with colours and styles combined from 800 pieces each, so quarter-zip and crew styles can be built inside a single run.

Markets We Ship Fleece Pullovers To

USA: Fleece Layers for Outdoor Retailers and Uniform Programs

American outdoor retailers and uniform buyers build their fleece wall on this style: quarter-zip and crew pullovers in core colours, embroidered with the buyer's mark, delivered against the season calendar.

UK: Quarter-Zip Fleeces for Outdoor Shops and Workwear Suppliers

British outdoor shops and workwear suppliers take the quarter-zip as a steady year-round layer, in mid-weight cloth with bound cuffs and the buyer's embroidery at the chest.

Germany: Polar Fleece Pullovers for Own-Label Outdoor Ranges

German own-label outdoor ranges place heavier polar fleece pullovers where the even pile, the flat seams and a fit that matches the size chart are what their customers reorder.

Canada: Heavyweight Fleece for Cold-Season Crew Programs

Canadian buyers order the 300 to 340 gsm cloth for work crews and outdoor staff who wear the pullover as their main warm layer through a long cold season.

France: Lightweight Microfleece for Boutique Outdoor Labels

French boutique labels order light microfleece pullovers in short seasonal runs of colour, sampled and approved ahead of each collection, with fine embroidery in place of prints.

Australia: Midweight Fleece Pullovers for Southern Winter Retail

Australian retailers run midweight fleece as their winter layer, in stone, grey marl and burgundy shades that carry across their cold-season programs.

Questions USA Buyers Ask Before Ordering Fleece Pullovers

Can we choose the fleece weight for each style?

Yes. Microfleece and polar fleece run from 180 to 340 gsm, and each style in your range can carry its own weight. Cloth swatches in your colours are sent so you approve the hand and the pile before sampling.

Does the anti-pill finish hold up in washing?

The cloth is anti-pill finished on both faces and tested in our own wash checks before it is offered, and the sample you approve is sewn from the same bulk cloth, so what you wash-test is what production runs. Care wording follows your format.

Can our logo go on the chest as embroidery?

Yes. Chest and sleeve embroidery is stitched in-house from your artwork, with thread colours matched before sampling. Woven labels, zip pulls and hang tags can carry your branding the same way.

What is the minimum order quantity for fleece pullovers?

Programs start from 3,000 pieces per order. Inside that total, colours and styles combine from 800 pieces each, so a quarter-zip, a crew style and a ladies version can run together in one order.

Do you deliver fleece pullover orders to the USA?

Yes. The USA is one of the main markets for this style, and every order ships with full export documentation, through your nominated forwarder or freight arranged by us. The other markets we serve are covered in the markets section above.

How are the pullovers packed for retail sale?

Every pullover is checked one by one, folded or bagged to your format, with your tags and tickets on and zips protected. Cartons are marked to your specification, packed the way your warehouse or stores need them.