Men's Heavy Canvas Work Shorts from Bangladesh for USA Work Crews and Trade Buyers

Canvas Work Shorts Cut and Sewn to Order in Bangladesh

Hot weather does not stop a site, a farm or a delivery round, and the short a crew wears through it has to work as hard as the trouser it replaces. Our men's canvas work short is built for that job: heavy cotton duck, a straight knee-length leg, pockets that carry tools instead of tearing away from them, and seams stitched for strain. Our factory in Dhaka has made garments since 1987, and workwear buyers come back to this style because the cloth, the fit and the shade hold from the first order to the fifth.

Every order is made to order: your colours, your label, your pocket layout and your packing, produced as one controlled run in our own plant.

Heavy Cotton Duck That Softens Without Thinning

The cloth is cotton canvas duck, a dense plain weave with the yarn packed tight enough to shrug off concrete edges, timber splinters and the daily scrape of a tool belt. It starts firm, the way good duck does, then softens on the body across the first washes without going thin at the seat or the knee. The face stays dry and matte, the weave stays visible, and dye lots are checked against the approved swatch before cutting, so the khaki in the first carton matches the khaki in the last.

Tool Pockets, a Hammer Loop and Room to Crouch and Climb

A work short earns its keep in the details a man uses all day. Two deep slanted front pockets take a phone, tape and folding rule; two patch back pockets carry a wallet and notebook; a coin pocket sits inside the right front, and a hammer loop hangs at the side seam where a hammer or wrench rides without swinging against the leg. The waistband is firm with wide belt loops bar tacked at the base, the main seams are triple stitched, and the seat and rise are cut with working room, so the short does not bind when a man crouches, climbs a ladder or kneels at a skirting board.

Cut to the Knee for Crews Working in Full Heat

The leg ends at the knee: long enough to kneel on and to satisfy site rules that ban short shorts, short enough to let air move on the worst afternoons. It is a straight work leg, not a fashion taper, with the hem sitting level all round. In hot months this is the garment a crew actually lives in, and buyers who run it alongside our canvas work pants give their customers one cloth and one colour story across the full year.

Work Short Waist Sizes 30 to 46 Graded for the German Trade Market

The run covers men's waist sizes 30 to 46 in two-inch steps, with the knee length held across the run and longer or shorter inseams graded where a program asks for them. German trade buyers order this style steadily for workwear ranges sold through tool and trade counters, and their programs pair the full waist run with core colours held for reorders. A complete size set is measured against the approved sample before bulk cutting, and waist, rise, thigh and leg figures are recorded size by size.

Your Brand on the Waistband, Your Packing in the Carton

The short leaves our floor as your product. Your woven label sits in the waistband, your hang tags and barcode stickers go on at packing, and an embroidered crew or company logo can sit on the leg or above the back pocket. Pairs are folded, polybagged and cartoned to your format, with sizes and colours mixed inside one order where your program needs them. Nothing on the garment or in the carton names us.

Tech Pack, Fit Sample, Bulk Run - How a Canvas Short Order Moves

An order starts with your specification: cloth weight, colours, pocket layout, size chart, label artwork and packing. We sew the sample in the actual cloth and send it for approval; your comments come back, the sample is corrected, and only the approved sample releases bulk cutting. Production runs as one order on our floor, with checks at cutting, sewing and finishing, and a final inspection against the approved sample before the cartons are sealed. Programs start from 3,000 pieces per order, with colours and styles combined from 800 pieces each, so core colours and a seasonal shade can run inside a single order.

Markets We Ship Canvas Work Shorts To

USA: Summer Work Shorts for Construction Crews and Suppliers

American workwear suppliers build their summer offer on this style: khaki, stone and olive as the core, the full waist run in one program, and the hammer loop and tool pockets that site crews ask for by name.

UK: Own-Label Work Shorts for Trade Catalogues

British trade catalogues take the short under their own label for the warm months, with steady core colours for repeat orders and sizes packed the way their branches and mail-order runs need them.

Germany: Hard-Wearing Shorts for Facility and Trade Teams

German buyers place the short in facility, grounds and trade team programs where a knee-length short is worn as uniform: firm duck cloth, a tidy straight leg, and sizing that covers a whole crew in one order.

Canada: Short-Season Site Shorts Packed by Program

Canadian programs order ahead of a short, hot construction season, mixing waist sizes and colours inside one order so every depot opens the season with a complete run on the shelf.

Australia: Heavy Shorts for Station, Farm and Workshop Wear

Australian rural and workshop buyers take the heavy duck setting for station and farm work: a cloth that stands up to dust, wire and timber, in colours that hide a day's work between washes.

UAE: Cool Work Shorts for Outdoor Service Crews

Service and maintenance buyers in the Emirates order the lighter duck setting for outdoor crews: a cooler cloth, a tidy knee-length cut for client-facing work, and one uniform program across a full team.

Questions USA Buyers Ask Before Ordering Canvas Work Shorts

What canvas weights can we order the work shorts in?

Two settings cover most programs: a heavy duck for site and farm work, and a lighter duck for indoor, delivery and service crews. The weight is fixed at sampling and held for reorders.

How long is the leg, and can we set our own inseam?

The standard leg ends at the knee. Longer or shorter inseams are graded to your chart, and the approved length is measured on the size set before bulk cutting starts.

Can the shorts carry tool pockets and a hammer loop?

Yes. The standard build already carries deep front pockets, patch back pockets, a coin pocket and a side hammer loop, and the pocket layout can follow your tech pack where your range needs a different arrangement.

What is the minimum order quantity for canvas work shorts?

Programs start from 3,000 pieces per order. Inside that total, colours and styles combine from 800 pieces each, so a core range and its seasonal colours can run together.

Do you deliver canvas work short orders to the USA?

Yes. The USA is one of the main markets for this style, and every order ships with full export documentation, through your nominated forwarder or freight arranged by us. The other markets we serve are covered in the markets section above.

Can we embroider our crew logo on the shorts?

Yes. Crew and company logos are embroidered on the leg or above the back pocket from your artwork, sampled first so the stitch size and position are approved before bulk production.